PARBMX

BSD JONESIN’ FRAME CUPPA CABANA

Pay in three equal instalments 3 x 138,33 

415,00 

The JONESIN’ frame is Sam Jones’ signature frame. As you may know Sam is a master of front end tricks and he designed his new frame with a steep 76° headangle especially for those moves. Coupled with a short 12.7-13.2″ rear end and a 8.9” standover as well as using our new superscoop chainstay tubing for added tire clearance…

Clear
Piegādes izmaksas / delivery costs
SKU: N/A Category: Manufacturer:

The JONESIN’ frame is Sam Jones’ signature frame. As you may know Sam is a master of front end tricks and he designed his new frame with a steep 76° headangle especially for those moves. Coupled with a short 12.7-13.2″ rear end and a 8.9” standover as well as using our new superscoop chainstay tubing for added tire clearance…

Tech specs
Toptube lengths 20.4 / 20.6 / 20.8 / 21
Headtube angle 76°
Headtube length 117mm
Seattube angle 71°
Rear end length 12.7-13.2″
BB Height 11.7″
Standover height 8.9″
Weight 5lbs
Brake mounts none – brakeless
Tubing Sanko Japanese seamless 4130 CrMo / triple butted
Headtube Heat treated 4130 CrMo / CNC / Offset thickness
Bottom Bracket Heat treated 4130 CrMo / CNC machined
Chainstay SuperScoop tubing
Dropouts Heat treated 4130 CrMo / Invest cast
Seatclamp Built in
Colours CUPPA CABANA / FLAT BLACK / APRICOT / FLAT RAW / SMOKE GREEN

SUPERSCOOP CHAINSTAY

Our new Superscoop chainstay provides more tire clearance for when your wheel is slammed. The tubing is press formed post bending to create extra room where it’s needed most without the need for an invest cast yoke.

INVEST CAST DROPOUTS

The dropout is cast as one piece, much stronger than a plate welded to a tube. 7mm thick to provide good support for your axle, and the small shape has been designed for grinding meaning there’s no overhang to catch on ledges or rails, also the dropout is heat treated before welding making it extra tough. And finally there are integrated chain tensioner bolts inside.

INTEGRATED SEATCLAMP

The seatclamp is built into the frame so there’s no need for a separate clamp. This keeps the frame clean and simple while also allowing the seat to be slammed lower. Also the slot cut beneath the seatclamp gives more clamping power less torque on the bolt.

Dimensions 95 × 33 × 16 cm
Color

sand

TopTube

21"